Operation Manual

224
Troubleshooting
After the Car Battery Has
Been Replaced
When the car battery is replaced, some of the
memory contents are deleted.
Example: the set route
(The set destination and any waypoints are
retained.)
If This Product Does Not
Start Up
If the map card program is damaged, use the
program disc to use functions other than the
navigation system.
NOTE
• The program disc for updating is
required. For details, please consult your
Mitsubishi Motors Dealer.
• Unlock the MAP card and audio SD card
locks beforehand.
• Do not use the Loading.kwi in the
“Program for Europe,Russia,Australia”
folder inside the program disc.
1
Take the map card out of this
product.
①
②
MAP Card
→“Remove the SD Card”(P16)
2
Copy the “Loading.kwi” le
in the “Program for North
America” folder inside the
program disc onto an audio SD
card.
Copy from your home computer to the
audio SD card.
3
Insert the audio SD card onto
which you copied the extracted
les into the map slot.
Audio SD Card
Map slot
→“Insert an SD Card”(P15)
4
Switch the vehicle's engine
switch key to “OFF” rst, then
switch to “ACC” or “ON”.
▼
The product starts up.