Operation Manual

Trip
139
INFO/SETTINGS INFO
3
Touch
Lap
.
▼
The current measurement results are
recorded in “A”.
4
Touch
Stop
.
▼
The measurement is stopped and the
measurement results are recorded in the
totals list.
ADVICE
• In Step 3, if you touch [Lap] again, the
measurement results in “A” are recorded
in “B”, and the previous measurement
results are recorded in “A”. In this
way, each time you touch “Lap”, the
measurement results are moved down
“A”, “B”, “C”, and “D”.
• After stopping in Step 4, if you touch
[Start], measurement resumes.
NOTE
• During measurement, if you switch
the ignition key to OFF, measurement
is stopped. At this time, if you return
the ignition key to ON, measurement
resumes.
Delete Lap Times
This deletes the recorded measurement
results.
1
On the lap time screen, touch
Reset
.
▼
Deletion of the recorded measurement results
is complete.