Operation Manual

This Product
13
Introduction Basic Operation
When the panel is open
1)
3)
2)
1) Map slot
The map card that contains the map data
for the navigation functions is inserted
here.
2) User slot
An audio SD card is inserted here. Audio
SD cards can be played
(P119) . Also, map
data can be updated.
→“Update the Map Database”(P135)
3) Disc slot
When a disc is inserted that can be played
by this product, starts playback.
→“Inserting the Disc”(P80)
Start
Start the system.
CAUTION
• This system cannot be started unless a
map card is inserted.
1
Switch the vehicle's ignition
key to “ACC” or “ON”.
2
Check the message, then touch
OK
.
If the audio function was used last the
previous time, the display switches to the
audio screen (the last screen).
▼
This switches to the navigation screen.
ADVICE
• Immediately after the ignition key
is switched to “ACC” or “ON”, if the
navigation functions are used, some
functions are not available immediately
after the map screen is displayed
because data is being read in from the
map card. Please wait until the reading is
completed.