Operation Manual

How to Read This Manual
11
Introduction Before Use
How to Read This Manual
The notation used in this manual and what it means are as follows.
1)
2)
3)
4)
7)
5)
6)
8)
9)
10)
1) Volume Header
Classied by main functions.
2) Chapter Header
Classies more nely the main functions
in the volume header. A chapter header
appears at the head of each chapter.
You can also check the index on the right
edge.
3) Major Header
Classies the main operations and
functions in a chapter.
4) Intermediate Header
Classies the operations and functions
under the major header.
5) Minor Header
Classies more nely the operations and
functions classied under the intermediate
header.
6) Operation procedure
These are numbers that shows the
operation procedure. Perform the
procedure in the order of these numbers.
7)
○○○
key or [○○○] key
Shows an operation key on the panel.
8)
○○○
or [○○○]
Shows a touch switch displayed on the
screen.
9)
(P000)
Shows the page to refer to. It contains
relevant explanations etc.
10)
Continued on the next page
Used when the explanation of operations
is continued.