Operation Manual

RTT (Real Time Traffi c) 6-2
Dynamic Route Guidance
If a RTT symbol with received data is
displayed on the route while driving,
atraffic information interrupt is displayed
automatically and the systemsearches
for a detour route.The traffic information
interrupt is displayed automatically.
1 Touch [Yes] on the Dynamic
Route Guidance screen
eng_a679
eng_a680
eng_a681
The system searches for a detour route.
NOTE
• When [Show new
route] is touched,
the original route
and new route
will be displayed.
eng_a682
• If Dynamic Route Guidance is not set to ON in RTT
settings,interrupt displaywill not be performed. Refer
to
“RTT Options” (page 6-4) .
(The default setting for Dynamic Route Guidance is ON.)
• When [No] is selected for a RTT symbol, No symbol
interrupt is displayedagain until the ACC is turned
OFF/ON.
Set as Surveillance Map
A maximum of three map screens that display traffi c
information can be stored.
If frequently driven roads are stored in advance, it easy
to view traffi c information, without having to scroll the
map.
Storing from the RTT Traffic Information Screen
1 Display the traffi c information
eng_a615
2 Use the Joy-Stick to place the
cursor on the location to be stored.
Press the [ENT] key
eng_a616
3 Touch [RTT surveillance Map 1 (2, 3)]
eng_a617
The data is stored to the selected number.
NOTE
• If a number is selected where a Surveillance Map
has already been stored, the new data automatically
overwrites the old data and is saved.