Operation Manual

Detour 4-3
Route
Detour
Detours that specify the distance from the
current location, or detours that specify
streets to avoid can be set.
1 Touch [Route] on the current
location screen
eng_a645
The route menu is displayed.
2 Touch [Detour]
eng_a500-2
eng_a107
The detour setting screen is displayed.
Detour Distance
Specifying the distance to calculate the
detour route.
1 Touch the desired detour distance
for “Detour Distance” in the detour
setting screen
(page 4-3)
eng_a648
A detour route is calculated according to the specifi ed
distance, and route guidance starts.
NOTE
• The distance unit in the factory settings is “miles”. If the
unit is changed to “km” (
“System Settings” (page 11-5) ),
the detour distances are [1], [5], [10], [20], [40], [80].
• A detour route longer than the entire route length
cannot be selected.
Avoid Street
Settings are performed here for selecting
a start street and an end street, and
detouring the area in between.
1 Touch [Avoid Street] in the detour
setting screen
(page 4-3)
A list of streets to be passed on the current route is
displayed.
2 Touch the start street
eng_a109
NOTE
• If the route to be calculated detours only one street,
go to step 4.
3 Touch the end street
eng_a110
4 Touch [Set]
A detour route is calculated according to the specifi ed
street area, and route guidance starts.