Operation Manual
Changing the Map Display 2-7
Basic Operation
2
Touch [ ] to display a wide area
eng_a632
A wider area can be viewed each time [
] is touched.
3
Touch [ ] to display a detailed
area
eng_a633
A more detailed area can be viewed each time [ ] is
touched.
NOTE
• Perform these operations while the scale bar is being
displayed.
• Touch and hold [ ] or [ ] to change the scale using
smooth zoom.
Changing Map Orientation
The map orientation can be changed
according to various conditions.
1
Touch the orientation button
Orientation Mark
eng_a634
North-Up
eng_a635
Heading-Up
Each time the orientation mark is touched, the map
orientation is changed in the sequence “North-Up”
“Heading-Up” “Auto”.
Map Orientation
Mark Name Display Contents
(Red) North-Up
The vehicle mark is rotated so
that the north of the map is
always facing the front (up).
(Red)
Heading-
Up
The map is rotated so that
the vehicle is always facing
the front (up).
(Blue)
or
(Blue)
Auto
“Heading-Up” or “North-
Up” is selected automatically,
depending on the map scale.
“Heading-Up” is selected for a
scale of 1/16 miles (100m) or
less, and “North-Up” is selected
for a scale of 1/8 miles (250m)
or more.
In Two Maps Display
When two maps are displayed, the left and right
maps are linked together, with either “Heading-Up” or
“North-Up” selected for both. However, when “Auto”
is set, different orientations can be selected for the left
and right maps, depending on the scale.