Operation Manual

Starting the MMCS 2-1
Basic Operation
Basic Operation
Starting the MMCS
WARNING
• Do not operate the Mitsubishi Multi Communication
System (MMCS) while driving.
• Always concentrate on your driving fi rst. Keep your
eyes and mind on the road. If distracted while
driving, you could cause an accident.
•
When operating the MMCS, do not park with the
engine running in a closed or poorly ventilated
area. Carbon monoxide gas, which is odorless and
extremely poisonous, can build up and cause serious
injury or death.
1 Turn “ON” the ignition switch
eng_244
eng_a002
The opening screen is displayed.
If any function other than AUDIO was used last time,
go to Step 2.
NOTE
• If special days and anniversaries (page 10-1) have
been set, when the date matches the settings, the
set icon is displayed on screen.
• If maintenance information
(page 10-9) has been set,
when the maintenance distance has been exceeded
or the maintenance timing has been exceeded, a
telop will be displayed in the opening screen.
2 Touch the desired language
eng_a600
NOTE
• When the meter is set to Auto, the language of both
sides can be changed by performing operations on
either the MMCS side or the meter side.
• When the meter is set to Manual, the language
of the meter side and the MMCS side can be set
separately.
3 Touch [OK]
After a moment, the display is changed to the
navigation screen.
NOTE
• If the battery voltage is low in cold regions, etc., the
navigation screen is displayed rather than the screen
last used.