Specifications

43
BCN-B11127-479*
Class No. Symbol Name and function
Initial
value
Unit Setting range
69 CDS Gain changing condition
Used to set the value of gain changing condition (command frequency,
droop pulses, servo motor speed) selected in parameter No. 68.The set
value unit changes with the changing condition item.
10 kpps
pulse
r/min
0
to
9999
70
CDT Gain changing time constant
Used to set the time constant at which the gains will change in response
to the conditions set in parameters No. 68 and 69.
1 ms 0
to
100
71 VPI 100
72 VLI 10000
73 ERZ 10
74 ER2 10
75 SRT 100
76 TRT 100
77 DBT
For manufacture setting
100
78
*DI0
Input / Output device selection
Used to select the CN1A-19 pin to output or input device
0000 0000h
to
0001h
79 *DI1 Input device selection 1
Used to select the function of CN1A-8 pin and CN1A-19 pin
Setting Input function Setting Input function
00 No function 17 Gain changing selection
01 Forced stop 18
02 Servo on 19
03 Alarm reset 1A
04 FWD stroke limit 1B
05 REV stroke limit 1C
06 FWD rotation start 1D
07 REV rotation start 1E
08 Auto. / Manu. 1F
09 20
0A Point table # selection 1 21
0B Point table # selection 2 22
0C Point table # selection 3 23
0D Point table # selection 4 34
0E 25
0F External torque limit 26
10 Internal torque limit 27
11 Proportional control 28
12 Temp. stop / Restart 29
13 2A
14 2B
15 Point table # selection 5 2C
16 2D
0009 0000h
to
1F1Fh
00 0
CN1A-19 pin
0: Output device
1: Input device
Set to the function of CN1A-19 pin
Set to the function of CN1A-8 pin