Specifications

2. OPERATION
2– 30
Set Value
0000
(initial value)
000A
000B
000C
Operation
Reference
Write
Reference
Write
Reference
Write
Reference
Write
Basic Parameters
No.0~19
Allowed for No. 19 only
Allowed for No. 19 only
Expansion Parameters
No.20~49
(2) Expansion parameters
To use the expansion parameters, change the setting of parameter No. 19 (parameter write
disable). After setting parameter No. 19, switch power off once, then switch it on again to make
the parameter valid.
The table below shows the parameters referenced and write enabled by the setting of param-
eter No. 19. Those parameters marked can be operated.