Specifications

– 4 –
Use the servo amplifier and servo motor under the following environmental conditions:
Securely attach the servo motor to the machine. If attach insecurely, the servo motor may
come off during operation.
The servo motor with reduction gear must be installed in the specified direction to prevent
oil leakage.
For safety of personnel, always cover rotating and moving parts.
Never hit the servo motor or shaft, especially when coupling the servo motor to the ma-
chine. The encoder may become faulty.
Do not subject the servo motor shaft to more than the permissible load. Otherwise, the
shaft may break.
When the equipment has been stored for an extended period of time, consult Mitsubishi.
CAUTION
Servo Amplifier
Environmen
Conditions
Servo Motor
Ambient
temperature
Ambient humidity
Storage humidity
Ambience
Altitude
Vibration
Storage
temperature
0 to +55 (non-freezing)
32 to 131
(non-freezing)
90%RH or less
(non-condensing)
-20 to +65
(non-freezing)
-4 to 149 (non-freezing)
90%RH or less (non-condensing)
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Max. 1000m (3280 ft) above sea level
5.9 (0.6G) or less
19.4 or less
[
°
C]
[
°
F]
[
°
C]
[
°
F]
[m/s
2
]
[ft/s
2
]
0 to +40 (non-freezing)
32 to 104
(non-freezing)
80%RH or less
(non-condensing)
-15 to +70
(non-freezing)
5 to 158 (non-freezing)
MC-MF series
HA-FF series
HU-UF13 to 43
HC-SF81
HC-SF52 to 152
HC-SF53 to 153
HC-RF series
HC-UF72 • 152
HC-SF121 • 201
HC-SF202 • 352
HC-SF203 • 353
HC-UF202
HC-SF301
MC-MF series
HA-FF series
HU-UF13 to 43
HC-SF81
HC-SF52 to 152
HC-SF53 to 153
HC-RF series
HC-UF72 • 152
HC-SF121 • 201
HC-SF202 • 352
HC-SF203 • 353
HC-UF202
HC-SF301
X • Y: 19.6
X: 9.8
Y: 24.5
X: 19.6
Y: 49
X: 11.7 Y: 29.4
X • Y: 64
X: 32
Y: 80
X: 64
Y: 161
X: 39 Y: 96