Specifications

Using a Personal Computer
Improved accuracy!
[Machine analyzer operation] window
Improved usability!
[Gain search] window
Improved usability!
[Parameter setting] window
Additional menus further improve usability!
[Test mode menu] window
New functions!
[Amplifier diagnostic procedure] window
Improved usability!
[Amplifier Data Display] window
[
Input/Output I/F Display ]
window
[Monitor] function:
When the [Start] button is pressed, the servo motor is automati-
cally oscillated, and the machine system’s frequency characteris-
tics are displayed.
The frequency characteristics that could only be analyzed in a
range between 0.1 and 1kHz can now be analyzed in a range
between 0.1 and 4.5kHz. Use this also as a tool to comprehend
the machine system’s characteristics. In addition, data can be
overwritten.
The [Parameter setting] window has been renewed.
The basic setting parameters can be easily set in a
selection format. Settings in the list format are also
possible.
The test operation that
matchs the application
can be selected from
the multiple test mode
menus.
The amplifier diagnostic func-
tion has been newly added.
The DI/DO signal, command
pulse I/F and encoder pulse out-
put are checked. If any fault is
found, the amplifier’s faulty sec-
tion is pinpointed to speed up
recovery.
The diagnostic cable
(MR-J3ACHECK) is required.
While automatically fluctuating the gain, the servo support soft-
ware “MR Configurator” searches for values with the shortest
settling time and lowest overshooting or vibration.
Ever-higher level tuning is now possible.
The [Input/Output I/F Display] window has been renewed.
The [Input/Output I/F Display] window and [Amplifier Data Display]
window can be opened simultaneously, so the DI/DO ON/OFF status
and operation status can be checked in real time.
28