Specifications

ManualsBrandsMitsubishi ManualsAmplifierMelservo-J3 Series MR-J3-B

● Compatible personal computer

IBM PC/AT compatible model running with the following operation conditions.

● Operating conditions

●MRZJW3-MOTSZ111E

(Note 4)

Using a Personal Computer

Personal computer

(Note 2)

(Note 1)

Windows

98 Second Edition

Windows

Windows NT

Workstation4.0

Windows

2000 Professional

Windows

XP Professional

Windows

XP Home Edition

Monitor

Keyboard

Mouse

Printer

Communication cable



40MB

or more

60MB

or more

Use serial port or USB port

MR-J3USBCBL3M

—

Capable of resolution 800✕600 or more, high Color (16-bit display)

Compatible with above personal computers.

Compatible with above personal computers. Note that serial mice are incompatible.

Compatible with above personal computers.

Not required

Capacity selection software

MRZJW3-MOTSZ111E

(Note 4)

MR Configurator (Setup software)

MRZJW3-SETUP211E



: Available

: Unavailable

Software

Processor

Memory

Open hard disk capacity

Communication interface

Pentium133MHz or more (Windows

95, Windows

98, Windows

98 Second Edition,

Windows NT

Workstation4.0, Windows

2000 Professional)

Pentium150MHz or more (Windows

Me)

Pentium300MHz or more (Windows

XP Professional, Windows

XP Home Edition)

16MB or more (Windows

95)

24MB or more (Windows

98, Windows

98 Second Edition)

32MB or more (Windows

Me, Windows NT

Workstation4.0, Windows

2000 Professional)

128MB or more (Windows

XP ProfessionaI, Windows

XP Home Edition)

A user-friendly design facilitates selection of the optimum servo amplifi-

er, servo motor (including the servo motor with a electromagnetic

brake) and optional regeneration unit when entering constants and an

operation pattern into machine-specific windows.

(1) User defined operation patterns can be set. The user defined opera-

tion pattern can be selected from the position control mode opera-

tion or speed control mode operation patterns. The set operation

pattern can be also displayed in the graph.

(2) The feedrate (or motor speed) and torque can be displayed in the

graph during the selection process.

Features

Item Description

Types of machine

component

Parameter

Printing

Data storage

Inertia moment calculation function

Output

of results

Horizontal ball screws, vertical ball screws, rack and pinions, roll feeds, rotating tables, dollies, elevators, conveyors, and other

(direct inertia input) devices.

Selected servo amplifier model, selected servo motor model, selected regenerative resistor model, load inertia moment, load

inertia moment ratio, peak torque, peak torque ratio, effective torque, effective torque ratio, regenerative power and regenerative

power ratio.

Prints input specifications, operation pattern, calculation process, selection process feedrate (or motor speed) and torque

graphs and selection results.

Assigns a file name to input specifications, operation patterns and selection results, and saves them on hard disk or floppy disk, etc.

Cylinder, core alignment column, variable speed, linear movement, suspension, conical, truncated cone

● Specifications

Notes:

1. Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and other countries.

2. This software may not run correctly depending on the personal computer being used.

3. The screen shown on this page are for reference and may differ from the actual screen.

The servo amplifier MR-J3-10A, 20A, 40A or 70A is planned to be compatible with the MRZJW3-MOTSZ111E software version A1 or above in the near future.

The servo amplifier MR-J3-60A, 100A, 200A or 350A and servo motor HF-SP series are planned to be compatible with MRZJW3-MOTSZ111E software version A2 or above in the near future.

Servo support software

MR Configurator (Setup software) and capacity selection software are available as support softwares to improve usability.