Specifications

Introductory Parts
To order the following products, contact the relevant manufacturer directly.
● RS-422 connector
● RS-422 distributor (for multi drop)
● Servo amplifier power supply connector (press bonding type)
...
For 1kW or less
● Encoder connector
<For HF-KP series>
<For HF-SP series>
Item Model Description
Protection
level
RS-422 cable
Amplifier-side connector
RS-232C cable
Personal computer-side connector
RS-422/RS-232C
conversion cable
FA-T-RS40S
DSV-CABV
TM10P-88P
—
—
RS-422/RS-232C converter
Manufacturer:
MITSUBISHI ELECTRIC
ENGINEERING COMPANY LIMITED
Manufacturer: Diatrend Corp.
Manufacturer: HIROSE ELECTRIC CO., LTD.
RS-422 connector
—
BMJ-8
Manufacturer: Hachiko Electric Co. LTD
RS-422 distributor
—
Manufacturer: Molex
Manufacturer: Molex
Manufacturer: Molex
—
—
—
Wire size: 0.75mm
2
(AWG18) to 2.5mm
2
(AWG14)
Completed cable outer diameter: to φ3.8mm
(to φ0.150 inch)
Crimping tool (CNP57349-5300) is required.
51241-0600 (connector)
56125-0118 (terminal)
Amplifier-side
CNP3 connector
Amplifier-side
CNP2 connector
Amplifier-side
CNP1 connector
51240-0500 (connector)
56125-0118 (terminal)
51241-0300 (connector)
56125-0118 (terminal)
Manufacturer:
Tyco Electronics AMP K.K.
Manufacturer: Molex
IP65
—
1674320-1
Amplifier-side
CN2 connector (Note 1)
Motor encoder
connector
54593-1011 (connector housing)
54594-1015 (plug cover A)
54595-1005 (plug cover B)
58935-1000 (shell cover)
58934-1000 (shell body)
58937-0000 (cable clamp)
Wire size: 0.14mm
2
(AWG26) to 0.3mm
2
(AWG22)
Completed cable outer diameter: φ7.1 ± 0.3mm
(φ0.280 ± 0.012 inch)
Crimping tools 1596970-1 (for gland clip) and
1596847-1 (for receptacle contact) are required.
Manufacturer: DDK Ltd.
Type Model
Connector
Description
Wire size
Completed cable
outer diameter
Protection
level
Contact
IP67
Straight
Press
bonding
type
Soldered
type
Motor encoder
connector
CM10-SP10S-M-C1
CM10-SP10S-M-C2
CM10-SP10S-M-S1
0.3mm
2
(AWG22) to 0.5mm
2
(AWG20)
Crimping tool ( 357J-50446 ) is required
0.08mm
2
(AWG28) to 0.25mm
2
(AWG23)
Crimping tool ( 357J-50447 ) is required
0.5mm
2
(AWG20) or less
φ6.0
to 9.0mm
(φ0.236 to
0.354 inch)
Manufacturer: Molex
—————
Amplifier-side
CN2 connector (Note 1)
54593-1011 ( connector housing )
54594-1015 (plug cover A)
54595-1005 (plug cover B)
58935-1000 (shell cover)
58934-1000 (shell body)
58937-0000 (cable clamp)
Item Model Description
Protection
level
Item Model Description
Protection
level
Item Model
Protection
level
Item
Item
Model
Description Applicable cable example
Applicable cable example
Applicable cable example
Description
Protection
level
The amplifier-side CN2 connector made by 3M can be used.
Model: 36210-0100JL (receptacle), 36310-3200-008 (shell kit).
Note) 1.
● Personal computer communication cable
21