Instruction manual

3 - 17
3. LOAD SIDE ENCODER
3.4 Mitsubishi optional cable
connector sets
POINT
The IP rating indicated is the cable's or connector's protection against ingress
of dust and water when the cable or connector is connected to a servo amplifier
or servo motor. If the IP rating of the cable, connector, servo amplifier or servo
motor vary, the overall IP rating depends on the lowest IP rating of all
components.
3.4.1 MR-EKCBL
M-H
(1) Model explanations
Model
2
5
10
2
5
10
Symbol Cable length [m]
Long flex life
(2) Cable structure
The table shows this optional cable structure.
Characteristics of one core
IP rating
Flex
life
Length
[m]
Core size
[mm
2
]
Number of
cores
Structure
[Wires/mm]
Conductor
resistance [
/mm]
Insulation coating
OD d [mm] (Note 1)
(Note 2)
Finishing OD
[mm]
Wire model
IP20 Long
flex
life
2
5 10 0.2mm
2
12
(6 pairs)
40/0.08 105 or less 0.88 7.2
(Note 3)
A14B2339
6P
Note 1. d is as shown below.
d
Conductor Insulation sheath
2. Standard OD. Max. OD is about 10 greater.
3. Purchased from Toa Electric Industry.