Instruction manual

3 - 21
3. LOAD SIDE ENCODER
(d) MJ830/MJ831
[Unit: mm]
4.5 mounting hole
26
13
(13)
3
4.5
93
100
(115)
138 124
1
(4) Encoder cable
1) Cable structure
Prepare a cable based on the following structure diagram.
Linear encoder SH13
Servo amplifier
CN2L
1)
Interpolator
MJ830 or MJ831
Linear encoder
SL710 PL101-R/RH
SL710
PL101-
R/RH
2)
Head cable
Stabilized power supply
5V (MJ830)
12 to 14V (MJ831)
Head cable
Cable
Linear encoder
Encoder cable (Note) Head cable
Interpolator
(This should be
prepared by the
customer.)
SL710 PL101-R/RH Accessories for linear encoder
Cable Length
PL101-R: 0.3m
PL101-RH: 3m
SH13
1) Connector set
MR-J3CN2
(Option manufactured
by Mitsubishi Electric
Corporation)
(Refer to Section 3.4.)
2) Connector for Interpolator
(This should be prepared
by the customer.)
Connector: 10114-
3000VE
Shell kit: 10314-52F0-008
(3M or equivalent)
Accessories for linear encoder
Cable length: 1m
MJ830 or MJ831
Note. Produce an encoder cable. An optional cable is not provided