Instruction manual

3 - 19

3. LOAD SIDE ENCODER

(2) Linear encoder unit structure

Note that the increasing/decreasing directions change depending on the interpolator (MJ830/MJ831)

settings. The following figure shows the moving direction when the MODE switch of the interpolator

(MJ830/MJ831) is set to 5.

Always set an linear encoder home position (reference mark).

Increasing direction

SONY SL700

SONY PL101-R/RH

SH13

For using PL101-R/RH, SL700

For using SH13

Decreasing direction

Increasing direction

(3) Outline drawing

(a) SL710

[Unit: mm]

ML - P x (n - 1) 200

(20)

D/2

SL710

P 200

P x (n - 1 or 2)

Mount the scale on a non-magnetic material.

When mounting it on a magnetic material, provide

a non-magnetic layer of 3mm or more.

Effective measurement length (ML)

Full length = effective measurement length + 40

n - D reamed hole

(For D parallel pin insertion)

12 0.05