Instruction manual

3 - 13
3. LOAD SIDE ENCODER
(3) Outline Drawings
POINT
For the outline drawings of LIDA485, contact with HEIDENHAIN
CORPORATION.
(a) LC491M (Absolute type)
[Unit: mm]
2
= Without mounting spur
= With mounting spur
F = Machine guide
P = Measurement point for
adjustment
K = Dimensional tolerance for
machine installation
U = Compressed air filling port
S = Measurement length
starting point (pos. 20mm)
mounting spur
DIN ISO 8015
ISO 2768-m H