Instruction manual

2 - 24
2. LINEAR SERVO MOTOR
Procedure 4. Securely fix with bolts the secondary side (magnet) fixed as temporary joint.
Secondary side
to be a mounting standard
(3) Mounting the primary side (coil)
Procedure 1. Mount a part of the secondary side (magnet).
Procedure 2. Mount the primary side (coil) in the position free from the secondary side (magnet).
Procedure 3. Move the primary side (coil) over the secondary side (magnet) mounted.
Confirm that the primary side (coil) does not contact the secondary side (magnet).
Procedure 4. Mount the rest of the secondary side (magnet).