Instruction manual

2 - 16
2. LINEAR SERVO MOTOR
2.5.5 Outline drawings
(1) Primary side (coil)
(a) LM-H2P1A-06M
[Unit: mm]
Lead for thermistor (G1, G2): black
2 wires-AWG20 (Standard finish OD 2.12 mm)
Active length 400 mm
3-M5 screw depth 6.5
Wire mark
128
32 3232 32
400
210
(Lead active length)
Round crimping terminal
1.25-4
Approx.
40
31.8
43.0
Approx.3.5
Approx.10.5
Approx.0.7
Round crimping terminal
1.25-2
40
0
Secondary side
Lead for motor (U, V, W): black,earth (E): green/yellow
4 wires-AWG20 (Standard finish OD 2.12 mm)
Active length 400 mm
User system
User system
(b) LM-H2P2A-12M
LM-H2P2B-24M LM-H2PC-36M LM-H2P2D-48M
[Unit: mm]
Variable dimensions Lead for motor
Model
L M A C Size
Standard finish
OD
LM-H2P2A-12M 128 64 (32) 3 2 AWG20 2.12
LM-H2P2B-24M 224 2 64( 128) (64) 6 2
LM-H2P2C-36M 320 4 64( 256) (32) 9 2
LM-H2P2D-48M 416 5 64( 320) (64) 12 2
AWG16
2.7
Overall length L
Approx.
40
64
32
400
(Lead active
length)
M
Approx.3.5
43.0
Approx.0.7
31.8
C-M5 screw depth 6.5
Approx.10.5
Lead for motor (U, V, W): black, earth (E): green/yellow
Active length 400 mm
Lead for thermistor (G1, G2): black
2 wires-AWG20 (Standard finish OD 2.12 mm)
Active length 400 mm
210
Wire mark
Round crimping terminal
1.25-4
Round crimping terminal
1.25-4
A
Secondary side
User system
User system