Instruction manual

2 - 13
2. LINEAR SERVO MOTOR
2.5.4 Installation
(1) Mounting dimensions
[Unit: mm]
0.1
0.1
A
0.1
A
H 0.1(Note3)
Center on the primary side (coil) (Note 1)
0.5 or less
Center on the secondary side (magnet) (Note 2)
Note 1. Centers on the primary side (coil) are as follows.
LM-H2P1
- : Center of mounting screw pitch
LM-H2P2
- : Center mounting screw position
LM-H2P3
- : Center mounting screw position
2. Centers on the secondary side (magnet) is the center of mounting screw pitch.
3. H length indicates (height of primary side (coil)) + (height of secondary side (magnet)) + (length of empty clearance: 0.5mm).
LM-H2P1
- : H= 43.0mm
LM-H2P2
- : H= 43.0mm
LM-H2P3
- : H= 48.0mm