Instruction manual

2 - 4
2. LINEAR SERVO MOTOR
CAUTION
Do not subject the servo amplifier and linear servo motor to drop impact or shock
loads as they are precision equipment.
Do not install or operate a faulty servo amplifier and linear servo motor.
Use the equipment within the specified environmental condition range. (For the
environmental condition, refer to Section 1.2.)
Tap holes on the linear servo motor are for machine installation. Do not use for
other purposes.
Do not touch the linear servo motor with wet hands.
For installation, use all screw halls and tap holes prepared on the linear servo
motor.
When two or more secondary side (magnet) is mounted, set the mounting screw
accumulative pitch tolerance within
0.2mm. Clearance may be left between the
secondary sides (magnets) depending on the mounting method and the numbers.
2.1.4 Instructions on storage
CAUTION
Do not climb or stand on servo equipment. Do not put heavy objects on
equipment.
Be sure to follow the storage conditions (ambient temperature and humidity, etc.).
Store the product in the environment where the rain water is prevented from
splashing on and dust, oil, and chemical materials from attaching on.
Do not strike servo amplifier or linear servo motor.
Do not modify the linear servo motor.
When the equipment has been stored for an extended period of time, consult
Mitsubishi.