Instruction manual

5 - 17
5. OPERATION AND FUNCTIONS
5.3.2 Absolute position linear encoder
The home position reference position on the absolute position linear encoder is a position per 1048576 pulses
(changeable with the third digit of the parameter No. PS 01), which is based on the linear encoder home
position (absolute position data = 0).
For the zeroing dog type home position return, the nearest home position reference position after turning the
zeroing dog signal off will be the home position. There is no restriction on the setting position for the home
position of linear encoder. The encoder Z-phase pulse (LZ) cannot be used.
ON
OFF
Home position return operation
Zeroing dog signal
Home position reference position
Linear servo motor position
Home position return speed
Home position return direction
Creep speed
(Note)
1048576pulse
1048576 pulses n times
Linear encoder home position
Home position
Note. Can be changed with the parameter No. PS01.
POINT
The data set type home position return can be also carried out.