Instruction manual

5 - 1
5. OPERATION AND FUNCTIONS
5. OPERATION AND FUNCTIONS
5.1 Startup
5.1.1 Startup procedure
Start up the linear servo referring to the following procedure.
Execution of installation and wiring
(Note) Settings of the linear encoder direction and the linear servo motor
direction (Refer to Section 5.1.2)
What is the type of linear encoder?
Incremental linear encoder
Absolute position linear encode
r
(Note) Setting of the linear encoder resolution (Refer to Section 5.1.3)
(Note)
Execution of the magnetic pole detection (Refer to Section5.2.3)
Change to the setting not requiring
the magnetic pole detection (Refer to Section5.2.3)
(Note) Positioning operation check (Refer to Section 5.4)
Positioning operation check using the controller (Refer to Section 5.5)
Home position return (Refer to Section 5.3)
Positioning operation
Note. MR Configurator is used.