Specifications

30
MITSUBISHI ELECTRIC
OPTIONS AND PERIPHERAL EQUIPMENT
4
왎
Buffer Battery
These terminal blocks TB-20/TB-50 are
adapter modules that simplify the wiring
of the inputs and outputs of the servo
amplifiers.
In addition preconfigured system cabling
is available for all t he terminal blocks
왎 Terminal Blocks
The servomotor's absolute value can be
maintained by mounting the MR-J3BAT
battery on the servo amplifier. The battery
is not required when the servo system is
used in incremental mode.
Battery
Application
Art. no.
MR-J3BAT
Buffering absolute
positioning data
160224
TB-20-S TB-20-C
TB-50-S TB- 50-C
Terminal block type Input/output block
Input/output block
Channels 8 / 16
50
Design 20 pin terminal module
50 pin terminal module
Connection type Screw terminals Spring terminals
Screw terminals Spring terminals
Application
MR-J3-D01 or
positioning unit FX2N-10PG
Servoamplifier MR-J3-A and MR-J3-T
Dimensions(WxHxD) mm 75x45x52 75x45x52
244 x 46.5 x 52.5 110 x 62 x 45
Order information Art. no.
149148 149023
in preparation in preparation
Connection cables
Connection cable:
MR-J2TBL05M; length 0.5 m; Art.-Nr.: 61216,
MR-J2TBL1M; length 1 m; Art.-Nr.: 61218
Connection cable:
MR-J2M-CN1TBL05M0; length 0.5 m; Art.-Nr.: 146794
MR-J2M-CN1TBL1M; length 1 m; Art.-Nr.: 189864
2018
16
14
12
10
8
6
4
2
/// BATTERY, SPECIAL CABLES AND TERMINAL BLOCKS
왎 Battery Connection Relay Cable
This relay cable is used to hold the abso-
lute value if the ser vo amplifier has to be
removed from a machine for shipping. The
ser vo m otor does not have a super capaci-
tor (for holding an absolute value for short
time) in the encoder. When this optional
cable is used, the absolute value can be
held even when the encoder cable is d is-
connected from the servo amplifier, mak-
ing it easy to do maintenance on the servo
amplifier.
Cable
Application
Art. no.
MR-J3BTCBL03M
Buffering absolute
value
160327
왎 Diagnostic Cable
This cable is required when using the
amplifier diagnostic func t ion of
MR -Configurator (Setup software).
Can be used only in combination with an
MR-J3-A servo amplifier.
Cable
Application
Art. no.
MR-J3ACHECK
MR-Configurator
diagnostic function
161577