Instruction manual

Operation Display and Operation
4 - 6
4.3.2 Indication list

The character "#" denotes any of numerals 0 to 8 and what it means is listed in Tab. 4-4.

The character "**" indicates the warning/alarm number.

To execute this functions the setup-software is required.
Display Status Description
AA Initializing
The servo amplifier was switched on when power to the
servo system controller is off.
Ab Initializing
 Power to the servo system controller was switched off
during power-on of the servo amplifier.
The station number set to the servo system controller
does not match the station number set with the coding
switch (CS1) of the servo amplifier.
A servo amplifier fault occurred or an error took place in
communication with the servo system controller. In this
case, the indication changes: Ab  AC  Ad  Ab.
The servo system controller is faulty.
AC Initializing
Communication started between the servo system
controller and servo amplifier
Ad Initializing
The initial parameters from the servo system controller
were received.
AE Initialize completion
Initial data communication with the serco system controller
was completed.
b#

Ready OFF
The ready off signal from the servo system controller was
received.
d#

Servo ON
The servo on signal from the servo system controller was
received.
C#

Servo OFF
The servo off signal from the servo system controller was
received
**

Alarm/Warning The alarm No./warning No. that occurred is displayed.
88 CPU error —
b0.

Test operation mode

JOG operation, positioning operation, programmed
operation, forced output signal
b#.
d#.
c#.
Motor-less operation
Tab. 4-3: Indication list
# Description
Tab. 4-4:
Meaning of character "#"
0 Test operation mode
1 Station 1
2 Station 2
3 Station 3
4 Station 4
5 Station 5
6 Station 6
7 Station 7
8 Station 8