Instruction manual

Display and Operation Operation

MELSERVO J2-Super 4 - 5

4.3 Display and Operation

4.3.1 Display sequence

On the servo amplifier display (two-digit, seven-segment display), check the status of

communication with the servo system controller at power-on, check the station number, and

diagnose a fault at occurrence of an alarm.

S000984C

Fig. 4-4: Display sequence

Servo amplifier power ON

Servo system controller power ON

Ready ON

Servo ON

Ordinary operation

Servo system controller power OFF

Servo system controller power ON

During emergency stop and forced stop

Emergency stop and forced

stop reset

The segments of b1, c1 and d1

indicate the station number. (station

1 in this example)

NOTE:

Ready ON/

servo ON

Ready ON/

servo OFF

Ready OFF/

servo OFF

Initial data

communication

Waiting for servo

system controller

power to switch ON

When alarm

occurs, alarm

code appears.

Refer

note

Refer

note

Refer

note