Instruction manual

Standard specifications Specifications
MELSERVO J2-Super 10 - 13
10.2.3 Torque characteristics
Servo motors 200V
NOTE
If a load is applied to the stopped servo motor, then the delivered torque should not exceed
70% of the rated torque.
S000934C
Fig. 10-10: HC-MFS series servo motor torque characteristics
S000935C
Fig. 10-11: HC-KFS series servo motor torque characteristics
HC-MFS13 (B)
HC-MFS053 (B)
HC-MFS43 (B) HC-MFS73 (B)
HC-MFS23 (B)
Torq ue [N m]Torque [Nm]
Torque [Nm] Torque [Nm]
Torque [Nm]
Peak running range
Peak running range
Peak running range
Peak running range
Peak running range
Speed [r/min]
Speed [r/min] Speed [r/min]
Speed [r/min]
Speed [r/min]
Continuous running range
Continuous running range
Continuous running range Continuous running range
Continuous running range
HC-KFS13 (B)
HC-KFS053 (B)
HC-KFS43 (B)
HC-KFS23 (B)
HC-KFS73 (B)
Torque [Nm]Torque [Nm]
Torque [Nm] Torque [Nm]
Torque [Nm]
Peak running range
Continuous running range
Peak running range Peak running range
Peak running range
Peak running range
Speed [r/min]
Speed [r/min]
Speed [r/min]
Speed [r/min]
Speed [r/min]
Continuous running range
Continuous running range
Continuous running range
Continuous running range