Instruction manual

General description Absolute position detection system
MELSERVO J2-Super 6 - 3
6.1.4 Battery installation procedure
For battery installation please follow the instructions which are given below:
 Open the operation window. (When the model used is the MR-J2-200B or MR-J2-350B,
also remove the front cover.)
 Install the battery in the battery holder.
 Install the battery connector into CON1 until it clicks.
b
CAUTION:
The internal circuits of the servo amplifier may be damaged by static electricity.
Always take the following precautions:
● Ground human body and work bench.
● Do not touch the conductive areas, such as connector pins and electrical parts,
directly by hand.
S000997C
Fig. 6-3: Battery installation for MR-J2S-350B or less
S001256C
Fig. 6-4: Battery installation for MR-J2S-500B, MR-J2S-700B, MR-J2S-700B4 or less
Operation window
Battery connector
CON1
Battery
Battery holder
MR-J2S-200B and MR-J2S-350B
MR-J2S-100B or less
Battery connector
Operation window
MR-J2S-500B, MR-J2S-700B, MR-J2S-700B4 or less
CON1
Battery holder
Battery