Instruction manual

Filter functions Special adjustment functions
MELSERVO J2-Super 5 - 1
5 Special adjustment functions
Use the functions given in this chapter, if you are not satisfied with the machine status after making
adjustment in the methods in section 4.6.
5.1 Filter functions
The servo amplifier MR-J2-Super have different filter functions:
● Machine resonance suppression filter
● Low-pass filter
If a mechanical system has a natural resonance point, increasing the servo system response
level may cause the mechanical system to produce resonance (vibration or unusual noise) at
that resonance frequency. As a result vibrations or higher levels of noise arise. The filter
functions serve to suppress any such resonance that may appear.
S000990C
Fig. 5-1: Filter function block diagram
+
-
Pr. 18
Pr. 25
0

except 00
1 or 2
Pr. 25
0

1

Encoder
Current
command
M
Low-pass
filter
Machine
resonance
suppression filter
Adaptive vibration
suppression
control
00
Speed
control