Instruction manual

Operation Parameter
4 - 22
Set the parameter value and switch power off once, then switch it on again to make that
parameter setting valid.
Number Symbol Initial value Unit Setting range
40 BLK 0000 Refer description
Parameter entry prohibition
Depending on the setting, various parameter ranges may be blocked for reading or writing (refer topage 4-11).
Setting Function Operation from controller
Operation from
setup-software
0000
(Initial value)
Read
Parameter No. 1 to No. 39
Parameter No. 1 to No. 11
and No. 40
Write
000A
Read
Parameter No. 1 to No. 39 Parameter No. 40
Write
000C
Read
Parameter No. 1 to No. 39
Parameter No. 1 to No. 40
Write
Parameter No. 1 to No. 11
and No. 40
000E
Read
Parameter No. 1 to No. 39 Parameter No. 1 to No. 40
Write
100E
Read
Parameter No. 1 to No. 39
Parameter No. 1 to No. 40
Write Parameter No. 40
Tab. 4-13: Parameter list details (9)