Specifications

89
Using a Personal Computer
Features
(1) User defined operation patterns can be set. The user
defined operation pattern can be selected from the posi-
tion control mode operation or speed control mode
operation patterns. The set operation pattern can be also
displayed in the graph.
(2) The feedrate (or motor speed) and torque can be also
displayed in the graph during the selection process.
(3)
Compatible with Windows
®
95, Windows
®
98, Windows
®
98
Second Edition, Windows
®
Me, Windows NT
®
Workstation4.0,
Windows
®
2000 Professional, Windows
®
XP Professional
and Windows
®
XP Home Edition
(Note 1)
.
IBM PC/AT compatible unit running Windows
®
95, Windows
®
98, Windows
®
98 Second Edition, Windows
®
Me, Windows NT
®
Workstation4.0,
Windows
®
2000 Professional.
Processor : Pentium 133MHz or faster (Windows
®
95, Windows
®
98, Windows
®
98 Second Edition, Windows NT
®
Workstation4.0,
Windows
®
2000 Professional)
Pentium 150MHz or faster (Windows
®
Me)
Pentium 300MHz (Windows
®
XP Professional/Home Edition)
Memory : 16MB or more (Windows
®
95), 24MB or more (Windows
®
98, Windows
®
98 Second Edition)
32MB or more (Windows
®
Me, Windows NT
®
Workstation4.0, Windows
®
2000 Professional)
128MB or more (Windows
®
XP Professional/Home Edition)
Open hard disk capacity: 40MB or more
OS
Monitor
Keyboard
Mouse
Printer
Windows
®
95, Windows
®
98, Windows
®
98 Second Edition, Windows
®
Me, Windows NT
®
Workstation4.0, Windows
®
2000 Professional,
Windows
®
XP Professional, Windows
®
XP Home Edition
Capable of resolution 800✕600 or more, high color (16-bit display).
Compatible with above personal computers.
Compatible with above personal computers. Note that serial mice are incompatible.
Compatible with above personal computers.
Personal computer
(Note 1, 2)
Item Description
Types of
machine component
Parameter
Printing
Data storage
Inertia moment calculation function
Output
of results
Horizontal ball screws, vertical ball screws, rack and pinions, roll feeds, rotating tables, dollies, elevators, conveyors, and other
(direct inertia input) devices.
Selected servo amplifier model, selected servo motor model, selected regenerative resistor model, load inertia moment, load inertia
moment ratio, peak torque, peak torque ratio, effective torque, effective torque ratio, regenerative power (regenerative energy for
MR-J2M), and regenerative power ratio.
Prints input specifications, operation pattern, calculation process, selection process feedrate (or motor speed) and torque graphs,
and selection results.
Assigns a file name to input specifications, operation patterns and selection results, and saves them on hard disk or floppy disk, etc.
Cylinder, core alignment column, variable speed, linear movement, suspension, conical, truncated cone
● Operating conditions
● Specifications
Notes:
1. Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and other countries.
2. This software may not run correctly depending on the personal computer being used.
3. The screens shown on this page are for reference and may differ from the actual screens.
4. This software can be obtained for free. Contact Mitsubishi for the details.
<Capacity selection software>
● MRZJW3-MOTSZ111E
(Note 4)
A user-friendly design facilitates selection of the optimum servo amplifier, servo motor (including the servo motor with a electro-
magnetic brake) and optional regeneration unit when entering constants and an operation pattern into machine-specific windows.