Instruction manual

11 - 4
11. OPTIONS AND AUXILIARY EQUIPMENT
(2) Motor cable
CAUTION
If you have fabricated the encoder cable, connect it correctly.
Otherwise, misoperation or explosion may occur.
Use the MR-JRBRCBL M-H when using the servo motor provided with
electromagnetic brake.
POINT
The encoder cable is not oil resistant.
Refer to Section 10.3 for the flexing life of the encoder cable.
When the encoder cable is used, the sum of the resistance values of the
cable used for P5 and the cable used for LG should be within 2.4 .
When soldering the wire to the connector pin, insulate and protect the
connection portion using heat-shrinkable tubing.
Generally use the encoder cable available as our options. If the required length is not found in the
options, fabricate the cable on the customer side.
Motor Cable
Servo Motor
(Note 1) Model Use for EN/UL Standard
(Note 2)
Long flexing life
Connector Set
HC-AQ0135D
to
HC-AQ0335D
MR-JRCBL
M-H MR-JRCNM
Note: 1. indicates the cable length: 2, 5, 10, 20, 30(m).
2. The standard cable has a long flexing life.
(a) MR-JRCBL M-H
1) Model explanation
Model: MR-JRCBL M-H
2
5
10
20
30
2(6.5)
5(16.4)
10(32.8)
20(65.6)
30(98.4)
Long flexing life
Symbol Cable Length [m]([ft])
2) Outline drawing
123456
121110987
123456
12 11 10 9 8 7
B
A
View A
View B