Instruction manual

11 - 12
11. OPTIONS AND AUXILIARY EQUIPMENT
11.1.2 Servo configurations software
The servo configuration software (MRZJW3-SETUP81E) uses the communication function of the servo
amplifier to perform parameter setting changes, graph display, test operation, etc. on a personal
computer.
(1) Specifications
Item Description
Communication signal Conforms to RS-232C.
Baudrate [bps] 9600
Monitor
Batch display, high-speed display, graph display
(Minimum resolution changes with the processing speed of the personal computer.)
Alarm Alarm display, alarm history, data display at alarm occurrence
Diagnostic
External I/O signal display, no-rotation reason display, cumulative power-on time display,
software number display, motor information display, tuning data display, ABS data display,
automatic VC offset display, shaft name setting.
Parameters Data setting, list display, change list display, detailed information display.
Test operation Jog operation, positioning operation, motor-less operation, program operation in simple language.
Advanced function Machine analyzer, gain search, machine simulation.
File operation Data read, save, print
Others Automatic operation, help display
(2) System configuration
(a) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model (Note 1) Description
(Note 2)
Personal
computer
Which contains a 80386 or higher CPU and on which Windows 3.1/95 (English) runs.
(80486 or higher recommended).Memory: 8MB or more, hard disk free space: 10MB or more, serial port
used.
OS Windows 3.1/95 (English)
Display
640
400 or more color or more 16-scale monochrome display which can be used with Windows 3.1/95
(English).
Keyboard Which can be connected to the personal computer.
Mouse Which can be used with Windows 3.1/95(English). Note that a serial mouse is not used.
Printer Which can be used with Windows 3.1/95(English).
Communication
cable
MR-JRPC98CBL3M MR-JRPCATCBL3M
When this cannot be used, refer to (3) Section 11.1.1 and fabricate.
Note: 1. Windows is a trade mark of Microsoft Corporation.
2. On some personal computers, this software may not run properly.
(b) Configuration diagram
CN3 CN2
Personal computer
To RS-232C
connector
Communication cable
Servo amplifier
Servo motor