Instruction manual
(5)
Auxiliary
equipment and options
described
in
Section
12.2.2.
(a) The circuit protector used should be the EN
or
IEC Standard-compliant product of the model
(b)
The sizes of the cables described in Section
12.2.2
meet the following requirements. To meet the
other requirements,
follow
Table
5
and Appencbx C in Eh'60204.
Ambient temperature:
40
(104) ["C ("F)]
Sheath: PVC (polyvinyl chloride)
Installed on
wall
surface
or
open table tray
(6)
Performing
EMC
tests
When EMC
tests
are
run
on
a
machme/device into whch the servo amphfier has been installed,
it
must
conform
to
the electromagnetic compatibhty (immunity/emission) standards
after
it
has satisfied the
operating environmentJelectrical equipment
specifications.
For
the other EMC Directive guidehes on the servo amphfier, refer
to
the
"EMC
INSTALLATION
GUIDELINES".