Instruction manual

5. PARAMETERS
-
Symbol
*OP4
-
Name and Function
'unction selection 4:
Used to select stop processing at LSPLSN signal off and choose the
machine resonance suppression filter.
u
:
-How to make a stop when LSPILSN
signal is valid.
0: Sudden stop
1 : Slow stop
In the position control mode,
the servo motor is decelerated
to a stop according to parameter
No. 7 setting.
In the speed control mode,
the servo motor is decelerated
to a stop according to parameter
No. 12 setting.
VCNLA voltage averaging
Used to set the filtering time when the
analog speed command (VC) voltage or
analog
speed limit (VU) is imported.
Set
0 to vary the speed to voltage fluctua-
tion in real time. Increase the set value
to vary the speed slower to voltage flu-
ctuation.
Set Value Filtering Time [ms]
2 3.55
3
7.1 1
-Machine resonance suppression filter
-
Initial
Value
0000
-
-
ietting
1000h
to
7301h
5- 11