Instruction manual
3.
SIGNALS AND WIRING
Note:
1.
2.
3.
4.
5.
6.
7.
8.
9.
To prevent an electric shock,
fit
the supplied earth terminal
(E)
to
the
servo
ampuer and always
connect
it
to
the earth
(E)
of
the control box. (Refer
to
sechon 3.9.)
Connect the &ode
in
the correct direction.
If
it
is
connected reversely, the
servo
ampldier wd be
faulty and wlll not output
signals,
habhg the forced stop and other protective circuits.
The forced stop switch must
be
installed.
CNlA
and CNlB have the same shape. Wrong connection of the connectors wd lead
to
a fault.
When
startmg
operation, always connect the forwardreverse rotation stroke end
signal
(LSNILSP)
with
SG.
(Normally closed contacts)
Trouble
(AL,M)
is
connected with
COM
in
normal
alarm-free conhbon.
The pins with the same
signal
name are connected
in
the
servo
ampkfier.
For
the command pulse
train
input of the Merential he dnver system. 2m max. for the open
collector
system.
Use MRZJWS-SETUF'61E
or
later.
3-
3