Instruction manual
2.
INSTALLATION
2.
INSTALLATION
Stacking in excess of the limited number of products is not allowed.
Install the equipment
to
incombustible. Installing them directly or close
to
Install the equipment in a load-bearing place in accordance with this Instruction
Do
not get on or put heavy load on the equipment
to
prevent injury.
Use the equipment within the specified environmental condition range.
Provide an adequate protection
to
prevent screws, metallic detritus and other
TlON conductive matter or oil and other combustible matter from entering the servo
combustibles
will
led
to
a fire.
Manual.
amplifier.
occur.
Do
not block the intake/exhaust ports of the servo amplifier. Otherwise, a fault may
Do
not subject the servo amplifier
to
drop impact or shock loads as they are
Do
not install or operate a fauky servo amplifier.
When the product has been stored for an extended period of time, consult
precision equipment.
Mitsubishi.
2.1
Environmental conditions
I
Environment Conditions
1
Ambient temperature
0
to +55
[“C]
(non-freezing)
32
to
+131
[“F)
(non-freezing)
-h
Ambient humihty
storage temperature
90%RH
or
less (non-condensing)
Ambient
90%RH
or
less
(non-condensing)
storage humidity
Vibration
Max.
lOOOm
(3280
ft)
above sea level
Altitude
-20 to +65 [“C] (non-freezing)
-4 to +149
[“F]
(nonfreezing)
Indoors (no dwect sunhght)
Free from corrosive gas, flammable gas,
oil
mist. dust and
dirt
5.9 [m/s2] (0.6G)
or
less
19.4
[ft/s2]
or less
2-
1