Instruction manual
0
Safety
Instructions
(Always read these instructions before using the equipment.)
Do
not attempt
to
install, operate, maintain or inspect the servo amplifier and servo motor until you have read
through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents
carefully and can use the equipment correctly.
Do
not use the servo amplifier and servo motor until you have a
full knowledge of the equipment, safety information and instructions.
In this Instruction Manual, the safety instruction levels are classified into "WARNING" and "CAUTION".
-1
resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions,,
-1
resulting in medium or slight injury to personnel or may cause physical
Indicates that incorrect handling may cause hazardous conditions,,
damage.
Note that the CAUTION level may lead to a serious consequence according to conditions. Please follow the
instructions
of
both levels because they are important to personnel safety.
What must not be done and what must be done are indicated by the following diagrammatic symbols:
~~
8:
Indicates what must not be done.
For
example,
"No
Fire" is indicated
by
.@
0:
Indicates what must be done. For example, grounding is indicated by
.e
In this Instruction Manual, instructions at a lower level than the above, instructions for other functions, and
so
on are classified into "POINT".
After reading this installation guide, always keep
it
accessible to the operator.
A-
1