Instruction manual

13. COMMUNICATION FUNCTIONS
13.1 2.1 1 Other commands
(1) Servo motor end pulse unit absolute position
Read the absolute position in the servo motor end pulse unit.
(a) Transmission
Send command [0][2] and data No. [9][0].
Command I Data No.
co) Reply
The slave station sends back the requested servo motor end pulses.
Absolute value is sent back in hexadecimal in
the servo motor end pulse unit.
(Must
be converted into decimal)
For example, data "000186AO' is 100000 Lpulse] in the motor end pulse unit.
(2) Command unit absolute position
Read the absolute position in the command unit.
(a) Transmission
Send command [0][2] and data No. [9][1].
co) %Ply
The slave station sends back the requested command pulses.
Absolute value is sent back in hexadecimal in the
command unit.
(Must be converted into decimal)
For example, data "000186AO" is 100000 [pulse] in the command unit.
(3) Software version
Reads the software version of the servo ampbfier.
(a) Transmission
Send command [O] [2] and data No.['i] [O]
Command 1 Data No
co) Reply
The slave station returns the software version requested.
0
Software version (15 digits)
13- 26