Instruction manual
13.
COMMUNICATION FUNCTIONS
(2)
Writing
the processed data
When the data
to
be written is handled as decimal, the decimal point position must be specfled.
If
it
is
not specfied, the data cannot be written. When the data
is
handled as hexadecimal, spec&
"0"
as the
decimal point position.
The data to be sent is the following value.
Decimal pint psition
[O]:
No
decimal point
[l]:
First least significant digit
121:
Second
least siginificant digit
[3]:
Third least siginificant digit
[4]:
Forth
least siginificant digit
[5]:
Fifth least siginificant digit
By
way
of
example, here is described how
to
process the set data when a value of "15.5" is sent.
Since the decimal point position is the second &git, the decimal point position data
is
"2'.
As
the data
to
be sent
is
hexadecimal, the decimal data
is
converted into hexadecimal.
155-9B
Hence, "0200009B" is transmitted.
13-
14