Specifications

3 - 20
Table 3.5 Frequently-used buffer memory (Continued)
Buffer Memory Address
Axis 1 Axis 2 Axis 3 Axis 4
Item Remarks/Setting range
Initial
value
• Write the set details of buffer memory to the flash ROM
Writing to the flash ROM is executed when the PLC READY signal [Y0] is
OFF.
1900
Flash ROM
write request
0: Flash ROM write is completed. (set by QD75)
1: Flash ROM write request (set by PLC program)
0
-1: The command speed setting is omitted. (current speed) 2004
2005
8004
8005
14004
14005
20004
20005 Command speed
1 to 2000000000
10
-2
mm/min
1 to 2000000000
10
-3
inch/min
1 to 2000000000
10
-3
degree/min
1 to 1000000
pulse/s
0
2006
2007
8006
8007
14006
14007
20007
20006
Positioning
address/movement
amount
• Set the positioning address or movement amount.
• The setting range differs according to the control system and units. (Refer to
Section 4.3)
0
2008
2009
8008
8009
14008
14009
20008
20009
Arc address
• When the control system is the ABS system circular interpolation, set the
sub point or center point address.
• When the control system is the INC system circular interpolation, set the
distance from the start point to the sub point or center point.
0