Specifications

7 - 15
The positioning data ranges from No.1 to 600. As default, however, only No.1 to 100 are displayed on the
screen.
To display No.101 or higher numbers, specify a range with the following procedure.
[Tools]
[Options] [Positioning data set] set a specified range.
(Reference axis)
No.
Operation
pattern
Control system
Axis to
be
interpolated
Acceleration
time No.
Deceleration
time No.
Positioning
address [µm]
Arc address
[µm]
Command
speed
[mm/min]
Dwell time
[ms]
M code
Positioning data
comment
101 1:
Continuous
A
: ABS linear 2 2-axis 0: 100 0: 100 50000.0 0.0 5000.00 700 0
102 1:
Continuous
D: ABS circula
r
sub
2-axis 0: 100 0: 100 150000.0 0.0 3000.00 700 0
103 1:
Continuous
A
: ABS linear 2 2-axis 0: 100 0: 100 200000.0 75000.0 9000.00 700 0
104 2: Path G: ABS circula
r
left
2-axis 0: 100 0: 100 200000.0 0.0 4000.00 0 0
105 2: Path
A
: ABS linear 2 2-axis 0: 100 0: 100 200000.0 200000.0 2000.00 0 0
106 0:
Completed
A
: ABS linear 2 2-axis 0: 100 0: 100 25000.0 0.0 10000.00 0 0
(Interpolation axis)
No.
Operation
pattern
Control system
Axis to
be
interpolated
Acceleration
time No.
Deceleration
time No.
Positioning
address [µm]
Arc address
[µm]
Command
speed
[mm/min]
Dwell time
[ms]
M code
Positioning data
comment
101 100000.0 0.0 0.00
102 150000.0 0.0 0.00
103 150000.0 150000.0 0.00
104 50000.0 0.0 0.00
105 25000.0 100000.0 0.00
106 25000.0 0.0 0.00
(Independent axis)
No.
Operation
pattern
Control system
Axis to
be
interpolated
Acceleration
time No.
Deceleration
time No.
Positioning
address [µm]
Arc address
[µm]
Command
speed
[mm/min]
Dwell time
[ms]
M code
Positioning data
comment
101 1:
Continuous
1: ABS linear 1
0: 100 0: 100 200000.0 0.0 5000.00 700 0
102 1:
Continuous
2: INC linear 1
0: 100 0: 100 -100000.0 0.0 7000.00 700 0
103 1:
Continuous
2: INC linear 1
0: 100 0: 100 30000.0 0.0 1500.00 700 0
104 1:
Continuous
2: INC linear 1
0: 100 0: 100 50000.0 0.0 2000.00 700 0
105 0:
Completed
1: ABS linear 1
0: 100 0: 100 25000.0 0.0 4000.00 700 0
106
Demonstration machine operation
1) When turning ON X3, the interpolation operation is carried out by axis 1 and axis 2,
and the independent operation is carried out by axis 3.
2) When turning ON X1 during the continuous operation, the operation is stopped.
When turning ON X9, the continuous operation is carried out.