Specifications

6 - 44
X0AC
Selects the
external
command signal
for the speed-
position switching
MOVP G62K2
(BUSY)
D10
=
D10
=
K81
K82
Positioning start data No.
Digital switch
between X20 to
X2B
M3
M3PLS
D10BIN
X3
(Start to setting data No.)
Y0B0
(Start)
K3X20
U0A\
MOVP G1505K1
U0A\
MOVP G1528K1
U0A\
Enables the
external
command signal
Enables the
speed-position
switching
D10
< >
K81 D10
< >
K82 M8
M8
MOV G1505K0
U0A\ Disables the
external
command signal
Demonstration machine operation
1) Turn X0 ON to carry out OPR.
2) Set the digital switch to the positioning data No.81.
Setting of positioning
data No.
0180
X2F
to
X20
0000
X3F
to
X30
3) Turn X7 ON and read the data No.81.
4) Turn X3 ON for the forward run.
If the CHG switch of the demonstration machine is turned ON during the operation,
it stops after moving 50mm.
Turn X1 ON during the operation to stop the operation.
5) Set the digital switch to 82.
Setting of positioning
data No.
0
2
80
X2F to X20
0000
X3F to X30
Turn X7 ON and read the data No.82.
Turn X3 ON for the reverse run.
If the CHG switch of the demonstration machine is turned ON during the operation,
it stops after moving 50mm.
Repeat