Specifications

6 - 36
Demonstration machine operation
1) Turn X4 ON, operate the forward run JOG, and turn X4 OFF at the desired position.
(Jot down the current value address
)
2) Set the digital switch.
Setting of
positioning data No.
0
5
30
Arbitrary
0000
X3F to X30 X2F to X20
3) Turning X7 ON carries out teaching the current value to the data No.35.
4) Turn X2 ON and move to the standby point.
5) Turning X3 ON executes the data No.35. (Stop at the jotted address)
6) Read the positioning data from the QD75.
7) Confirm that teaching has been performed for the address of the data No.35.
Repeat