Specifications

6 - 17
From the previous page
4) The "Auto refresh setting" dialog box appears.
Make the settings as follows:
Feed present value (Axis #1): D100
Machine feed value (Axis #1): D102
Feed speed (Axis #1): D104
Error No. (Axis #1): D106
Warning No. (Axis #1): D107
Enable M code (Axis #1): D108
Busy (Axis #1): D109
After the settings are made, click the
End setup
button.
5) Click the Exit
button.
6) The dialog box appears asking whether to save
the parameter. Click the Yes
button.