Specifications

5 - 14
From the previous page
5) Click
(Axis #1 operation test) on the
toolbar.
6) The Axis #1 TEST MODE setting dialog box
appears. Click the "OPR" tab.
7) Confirm that "Machine OPR" is selected for
"OPR type", and then click the REQ OPR
button.
8) When "Current feed value" of Monitor item
becomes "0", this means the OPR test has
completed.
9) From here, perform the test operation on the
next positioning data.
Click the "Position start" tab.
To next page