Specifications

5 - 12
5.5.4 Data write to QD75
Write the set parameters, OPR parameters and positioning data to the QD75.
(For the writing, a data type and range can be designated per axis.)
Note) Set the PLC CPU to the "STOP" status.
1) Click "Online"
"Write to module".
2) Write to module dialog box appears.
Put a checkmark in the check boxes of
"Positioning data", "Parameter data" and
"Flash ROM write".
3) Click the OK
button to execute writing to
the QD75.
4) The dialog box appears asking whether to
overwrite the flash ROM. Click the Yes
button.
5) Reset the PLC CPU.