Specifications

5 - 11
5.5.3 Simulation
Check if the set details of the operation pattern, control method, address and
command speed are correct using the simulation (virtual positioning) function.
1) Click "Edit”
"Simulation" with the
Positioning data Axis #1 displayed.
2) The simulation window appears. Select "1" for
"Positioning Start No.".
3) The simulation result of the positioning data
No.1 appears.
4) To see the simulation of other positioning data,
change "Positioning start No." to "2", "3", and
so on.
Note) The simulation result is made on the
premise that positioning is started from the
address 0.