Specifications

5 - 8
5.5 Positioning Exercise Using Test Operation Function
Project name TEST
Set the parameters, OPR parameters and positioning data using SW
D5C-QD75P
and write them to the QD75.
Perform the test operation and monitoring from the peripheral device in the test mode.
Procedure
Basic parameter and OPR parameter setting .......... Section 5.5.1
Positioning data setting .......... Section 5.5.2
Simulation .......... Section 5.5.3
Data write to QD75 .......... Section 5.5.4
Test operation and monitoring .......... Section 5.5.5
<Example of positioning >
Linear control (Operation pattern: Complete)
0 20000 70000
No.3 No.1
Positioning data No.
150000
300000
Address (pulse)
OP
Standby point
No.2